DI-TUBE 2.0 Deioniser Pack

The DI-TUBE 2.0 Deioniser Pack provides a convenient way to produce deionised water from a tap water supply for laboratory use. Its refillable cartridge contains colour-indicating resin that gradually changes from blue/green when new to brown/yellow as the resin becomes exhausted.

Key Features

• Refillable DI-TUBE 2.0 cartridge with indicating deionising resin
• Produces approximately 150 litres of deionised water per cartridge under typical New Zealand city-water conditions; actual capacity depends on the conductivity and total dissolved solids (TDS) of the incoming water
• Visible resin colour change helps indicate when replacement resin is required
• Supplied with tap adaptor, tubing, connectors and mounting hardware
• Compatible with the 48DCR DI-TUBE 2.0 Deioniser Refill Pack

Pack Contents

• 1 × refillable DI-TUBE 2.0 cartridge with indicating resin
• 1 × tap adaptor
• 1 × 3 m length of 6 mm white PVC tubing
• 1 × 6 mm tube to 1/4-inch male NPT straight push connector
• 1 × 6 mm tube to 1/4-inch male NPT elbow push connector
• 1 × 2-inch mounting clip and screws

Compatibility Note

The tap hose from the earlier Mark 1 deioniser can also be used with the DI-TUBE 2.0. Replace exhausted resin with the compatible 48DCR refill pack.

Important Note

Water yield varies with the quality of the incoming supply. Deionised water is not necessarily sterile or suitable for drinking.